Bumpy, Bumpy Roads

19 01 2011

Snow, and cold, and more snow, and more cold, have been the story of my life for the past couple of weeks. E-ville’s seen the biggest January snow storm in 20 years, followed by more snow almost every day and temperatures in the -20’s (before windchill). This is a winter city, though, and we don’t take snow days. I’ve ridden every day, though about half my trips included bringing my bike onto the train.

The first day of the big dump, I took a fall on a major thoroughfare while riding Porta-Bike (first fall of the winter, and first fall on that bike). Falling in traffic is always terrifying, and my first instinct is to get my ass up and out of the road, before checking if me & my bike are OK. As I was climbing over the 3 foot high windrow, dragging Porta-Bike behind me, some dudes in a car drove past and pointed and “ha-ha”ed me (Muntzed twice in one month – what is wrong with people?!?). I ended up with a few small bruises, but the bike seemed to take the worst of the fall, with one of the cotter pins loosening up.

I limped it to EBC, as I knew there was another problem festering that I needed to deal with. The bike once had a built in generator and there are holes in the frame where the wires used to run in and out, including one directly above the bottom bracket. When I initially cobbled the bike together, I never expected to be riding it as much as I have, never mind as a winter bike, and didn’t bother to plug it. The bottom bracket had already started to feel gritty, so I knew I’d better overhaul it and plug the hole before replacing the cotter pin.

Hole in frame successfully plugged with a screw and a piece of tube.

Random fun fact – no two nuts on Porta-Bike are the same size, and there is a mix of metric and imperial to keep it interesting. Oh, the joys of frankenbikes.

This is what the parts of the bottom bracket and cranks look like when they're not on the bike. I don't usually use those plastic bottom bracket condom things, but I dug one out in case the plug didn't hold.

With new grease and bearings (and a new cotter pin that took way too long to find) I was back on the street with Polar Porta Bike, the brown sugar slayer. A local street style blogger even stopped me for a picture on a cold afternoon (this is what bike style at -20 looks like, note the frost in my hair and scarf).

As the snow continued to pile up faster than the plows could remove it, cars and feet packed it down, turning every surface hard and bumpy, with textures ranging from washboard to mogul. When I first contemplated winterizing the folding bike, Ravingbikefiend warned me that the biggest reason he didn’t ride any of his 20″ wheels in winter was because of how the bumps jarred his back. After a few days, the thrill of quasi-bmx riding was replaced by my lower back screaming for mercy (the fall didn’t help, either), and I realized I needed to get on a full sized bike again.

Snow ridin' on the Glow-Bee

The Glow-Bee has needed some additional tweaking for its first winter. I discovered the cushy air sprung saddle I love so much turns rock solid when it gets cold, so I’ve temporarily replaced it with a less comfortable but much springier (and squeakier) old-school sprung saddle. I’ve also added a second studded tire on the back, making this the first winter I’ve ridden with two studded tires. It’s still not as stable as Polar Porta-Bike, but it’s faster and has gears, so it’ll do.

All this snow's been good for the snowshoe hares. They can walk on top of the snow and it lets them eat higher branches that they couldn't reach before.

The weather forecast is finally looking up, and near freezing temperatures will feel balmy compared to what it has been. Now, I’m looking forward to enjoying it (and marveling at all the mountains of snow higher than my head), instead of just bearing the ride.

Advertisements

Actions

Information

11 responses

19 01 2011
adventure!

Love that snowshoe hare!
Have you thought about putting a genearator hub on the Porta-Bike?

19 01 2011
evillerider

There’s a second hare in the photo, too.

If I rebuild the wheels for Porta-Bike, I might do something fancy like that. You just gave me an idea, though. I have a reelight on a bike I’m not using right now that has a broken magnet. If I installed it on the Porta-Bike, the higher rpm’s might help compensate for there being only one magnet and I might get some decent light out of that thing. Hmmm…will post if anything results of this…

27 01 2011
Chris Chan

I have some hard drive magnets that would probably work well, too, if you’re interested. They’re about the same size as the original Reelight magnets (a bit stronger, though), and unpainted steel/nickel, but you could paint them if you wanted them black.

27 01 2011
Chris Chan

(and by “would probably work”, I mean, they’ve worked well for me on other bikes)

19 01 2011
Val

“Brown Sugar Slayer” – love it! Just be glad you don’t live in Thunder Bay: http://www.copenhagenize.com/2011/01/ban-cycling-in-winter-thunder-bay.html There are none so negative as those who have never tried.

19 01 2011
evillerider

When I saw the title of that link, I thought they were actually thinking of banning cycling in winter. I’m glad that it’s just the musings of a few blowhards in the comments of a news article. When there have been cycling fatalities in the winter here (I think there’s been 2 in the last 15 years), it’s pretty common for the “I can’t drive a car safely in the winter therefore everybody else should be banned from the roads for their own good” club to let off steam that way too – and it’s disturbing how prevalent that attitude is. I hope it doesn’t get any further than rants in TB.

20 01 2011
Corey

Wow, I can’t believe that after a fall in traffic you got Muntz’d! Very uncompassionate. I’m glad you didn’t get seriously hurt.

I didn’t even see the second hare at first glance, their camoflauge works well with all the fresh snow. Ever end up in a race with a rabbit as they try to cross your wheel path?

26 01 2011
Ms. Ding

Great photo of the snowshoe hares – I too didn’t notice the 2nd one right away. Amazing picture of you, your bike and a ton of snow – wow! We’re just getting cold and ice, and some fluffy lake-effect snowflakes once in a while.. nothing like the snow you have been riding through!

25 11 2011
Arctic High « Breaking Chains and Taking Lanes

[…] the first time since I cobbled this bike together, the cranks are perfectly aligned. Additionally, the rubber plug I made last year for the bottom bracket hole seems to be working well, and the old grease was still pretty clean. […]

7 09 2013
Jonny Nostalgia

What did you end up using as a pin for the crank? I just picked up a Porta III yesterday and got it home to find a loose crank arm. Were you able to buy something similar from a store or did you have to salvage the part from another bike?

14 10 2013
evillerider

The local community bike shop stocks new cotter pins. They come in different sizes, so check the old one’s diameter with a spoke ruler. It’s generally a bad idea to re-use cotter pins after they’ve been extracted unless you’re in a real pinch.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: